NPS 14 Butt-Weld Fitting Dimensions

Butt-Weld Fittings

For NPS 14 butt-weld fittings (pipe OD 14.000 in / 355.6 mm): a 90° long-radius elbow is 21.00 in (533.4 mm) centre to end, a 45° elbow 8.75 in (222.3 mm), and a straight tee 11.00 in (279.4 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.

A90° elbow, long radius (centre to end)
533.4 mm21.00 in21.00 in533.4 mm
B45° elbow, long radius (centre to end)
222.3 mm8.75 in8.75 in222.3 mm
CTee, centre to end of run
279.4 mm11.00 in11.00 in279.4 mm
HReducer, end to end
330.2 mm13.00 in13.00 in330.2 mm

Drawing

533.4 mm21.00 in533.4 mm21.00 in⌀355.6 mm⌀14.000 in
279.4 mm11.00 in279.4 mm11.00 in279.4 mm11.00 in
90° long-radius elbow (centre to end A) and straight tee (run C = outlet M).Drawn to scale · Dimensions in mmDimensions in inches

NPS 14 specifications

DN (metric nominal)350
ODPipe outside diameter14.000 in355.6 mm
A90° elbow, long radius (centre to end)21.00 in533.4 mm
A90° elbow, short radius (centre to end)14.00 in355.6 mm
B45° elbow, long radius (centre to end)8.75 in222.3 mm
CTee, centre to end of run11.00 in279.4 mm
MTee, centre to end of outlet11.00 in279.4 mm
HReducer, end to end13.00 in330.2 mm
ECap length (standard wall)6.50 in165.1 mm
E₁Cap length (heavy wall)7.50 in190.5 mm

From NPS 14 the reducer length jumps (13.00" against 8.00" at NPS 12). Allow for it when a reducer sits next to a flange or valve in a tight spool.

Pipe of this size

Flanges of this size

All Butt-Weld Fittings sizes

Compare all 20 sizes in the Butt-Weld Fittings chart →

Sources

  1. ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
  2. ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
  3. pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
  4. Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
  5. pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.