NPS 16 Butt-Weld Fitting Dimensions

Butt-Weld Fittings

For NPS 16 butt-weld fittings (pipe OD 16.000 in / 406.4 mm): a 90° long-radius elbow is 24.00 in (609.6 mm) centre to end, a 45° elbow 10.00 in (254.0 mm), and a straight tee 12.00 in (304.8 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.

A90° elbow, long radius (centre to end)
609.6 mm24.00 in24.00 in609.6 mm
B45° elbow, long radius (centre to end)
254.0 mm10.00 in10.00 in254.0 mm
CTee, centre to end of run
304.8 mm12.00 in12.00 in304.8 mm
HReducer, end to end
355.6 mm14.00 in14.00 in355.6 mm

Drawing

609.6 mm24.00 in609.6 mm24.00 in⌀406.4 mm⌀16.000 in
304.8 mm12.00 in304.8 mm12.00 in304.8 mm12.00 in
90° long-radius elbow (centre to end A) and straight tee (run C = outlet M).Drawn to scale · Dimensions in mmDimensions in inches

NPS 16 specifications

DN (metric nominal)400
ODPipe outside diameter16.000 in406.4 mm
A90° elbow, long radius (centre to end)24.00 in609.6 mm
A90° elbow, short radius (centre to end)16.00 in406.4 mm
B45° elbow, long radius (centre to end)10.00 in254.0 mm
CTee, centre to end of run12.00 in304.8 mm
MTee, centre to end of outlet12.00 in304.8 mm
HReducer, end to end14.00 in355.6 mm
ECap length (standard wall)7.00 in177.8 mm
E₁Cap length (heavy wall)8.00 in203.2 mm

Pipe of this size

Flanges of this size

All Butt-Weld Fittings sizes

Compare all 20 sizes in the Butt-Weld Fittings chart →

Sources

  1. ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
  2. ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
  3. pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
  4. Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
  5. pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.