NPS 4 Butt-Weld Fitting Dimensions
Butt-Weld Fittings
For NPS 4 butt-weld fittings (pipe OD 4.500 in / 114.3 mm): a 90° long-radius elbow is 6.00 in (152.4 mm) centre to end, a 45° elbow 2.50 in (63.5 mm), and a straight tee 4.12 in (104.6 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.
- A90° elbow, long radius (centre to end)
- 152.4 mm6.00 in6.00 in152.4 mm
- B45° elbow, long radius (centre to end)
- 63.5 mm2.50 in2.50 in63.5 mm
- CTee, centre to end of run
- 104.6 mm4.12 in4.12 in104.6 mm
- HReducer, end to end
- 101.6 mm4.00 in4.00 in101.6 mm
Drawing
NPS 4 specifications
| DN (metric nominal) | 100 |
|---|---|
| ODPipe outside diameter | 4.500 in114.3 mm |
| A90° elbow, long radius (centre to end) | 6.00 in152.4 mm |
| A90° elbow, short radius (centre to end) | 4.00 in101.6 mm |
| B45° elbow, long radius (centre to end) | 2.50 in63.5 mm |
| CTee, centre to end of run | 4.12 in104.6 mm |
| MTee, centre to end of outlet | 4.12 in104.6 mm |
| HReducer, end to end | 4.00 in101.6 mm |
| ECap length (standard wall) | 2.50 in63.5 mm |
| E₁Cap length (heavy wall) | 3.00 in76.2 mm |
Pipe of this size
Flanges of this size
All Butt-Weld Fittings sizes
Sources
- ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
- ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
- pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
- Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
- pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.