NPS 4 Pipe Dimensions (DN 100)

Pipe Sizes

NPS 4 (DN 100) steel pipe has an outside diameter of 4.500 in (114.3 mm) in every schedule. In Schedule 40 the wall is 0.237 in (6.02 mm), giving an inside diameter of 4.026 in (102.26 mm); in Schedule 80 the wall is 0.337 in (8.56 mm) and the ID 3.826 in (97.18 mm).

ODOutside diameter
114.3 mm4.500 in4.500 in114.3 mm
IDInside diameter, SCH 40
102.26 mm4.026 in4.026 in102.26 mm
tWall, SCH 40
6.02 mm0.237 in0.237 in6.02 mm
Weight, SCH 40
16.07 kg/m10.80 lb/ft10.80 lb/ft16.07 kg/m

Drawing

⌀114.3 mm⌀4.500 in⌀102.3 mm⌀4.026 int = 6.02 mmt = 0.237 inSection shown: SCH 40
Wall by schedule (enlarged)5S2.11 mm0.083 in10S3.05 mm0.120 in406.02 mm0.237 in808.56 mm0.337 in16013.49 mm0.531 inXXS17.12 mm0.674 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 4 specifications

DN (metric nominal)100
ODOutside diameter4.500 in114.3 mm
tWall, SCH 5S0.083 in2.11 mm
tWall, SCH 10S0.120 in3.05 mm
tWall, SCH 400.237 in6.02 mm
tWall, STD0.237 in6.02 mm
tWall, SCH 800.337 in8.56 mm
tWall, XS (extra strong)0.337 in8.56 mm
tWall, SCH 1600.531 in13.49 mm
tWall, XXS0.674 in17.12 mm
IDInside diameter, SCH 5S4.334 in110.08 mm
IDInside diameter, SCH 10S4.260 in108.20 mm
IDInside diameter, SCH 404.026 in102.26 mm
IDInside diameter, SCH 803.826 in97.18 mm
IDInside diameter, SCH 1603.438 in87.33 mm
IDInside diameter, XXS3.152 in80.06 mm
Weight, SCH 4010.80 lb/ft16.07 kg/m
Weight, SCH 8015.00 lb/ft22.32 kg/m

Also known as

DN1004"100A

Pipe thread for NPS 4

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.