1/2-14 NPT Thread Dimensions

Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1

1/2-14 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 14 TPI (1.814 mm) and an outside diameter of about 21.336 mm (0.840 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 8.1 mm (0.320 in).

nThreads per inch
1.814 mm14 TPI14 TPI1.814 mm
DOutside diameter (pipe OD / major Ø)
21.336 mm0.840 in0.840 in21.336 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
8.1 mm0.320 in0.320 in8.1 mm
Tap drill (typical)
23/32 in (18.3 mm)

Drawing

gauge planeL₁ 8.1 mmL₁ 0.320 in⌀21.336 mm⌀0.840 inTaper 1:16 on diameter (exaggerated)
60°P = 1.814 mmP = 14 TPIFlat crests and roots (NPT)
NPT: 60° thread on a 1:16 taper. L₁ is the hand-tight engagement from the small end to the gauge plane.Proportions shown, not to scale · Dimensions in mmDimensions in inches

1/2-14 NPT specifications

nThreads per inch14 TPI1.814 mm
DOutside diameter (pipe OD / major Ø)21.336 mm0.840 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)8.1 mm0.320 in
L₂Effective thread length (L2)13.6 mm0.5337 in
Tap drill (typical)23/32 in (18.3 mm)
Thread angle60°
FormTapered 1:16 on diameter

1/2-14 NPT and G 1/2 / R 1/2 BSP both have 14 threads per inch and nearly the same diameter (21.3 vs 20.96 mm). They can start together but do not seal reliably. Check the thread angle with a gauge.

BSP thread of the same nominal size (not interchangeable)

Pipe this thread is cut on

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.