NPS 5 Pipe Dimensions (DN 125)

Pipe Sizes

NPS 5 (DN 125) steel pipe has an outside diameter of 5.563 in (141.3 mm) in every schedule. In Schedule 40 the wall is 0.258 in (6.55 mm), giving an inside diameter of 5.047 in (128.19 mm); in Schedule 80 the wall is 0.375 in (9.52 mm) and the ID 4.813 in (122.25 mm).

ODOutside diameter
141.3 mm5.563 in5.563 in141.3 mm
IDInside diameter, SCH 40
128.19 mm5.047 in5.047 in128.19 mm
tWall, SCH 40
6.55 mm0.258 in0.258 in6.55 mm
Weight, SCH 40
21.77 kg/m14.63 lb/ft14.63 lb/ft21.77 kg/m

Drawing

⌀141.3 mm⌀5.563 in⌀128.2 mm⌀5.047 int = 6.55 mmt = 0.258 inSection shown: SCH 40
Wall by schedule (enlarged)5S2.77 mm0.109 in10S3.40 mm0.134 in406.55 mm0.258 in809.52 mm0.375 in16015.88 mm0.625 inXXS19.05 mm0.750 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 5 specifications

DN (metric nominal)125
ODOutside diameter5.563 in141.3 mm
tWall, SCH 5S0.109 in2.77 mm
tWall, SCH 10S0.134 in3.40 mm
tWall, SCH 400.258 in6.55 mm
tWall, STD0.258 in6.55 mm
tWall, SCH 800.375 in9.52 mm
tWall, XS (extra strong)0.375 in9.52 mm
tWall, SCH 1600.625 in15.88 mm
tWall, XXS0.750 in19.05 mm
IDInside diameter, SCH 5S5.345 in135.76 mm
IDInside diameter, SCH 10S5.295 in134.49 mm
IDInside diameter, SCH 405.047 in128.19 mm
IDInside diameter, SCH 804.813 in122.25 mm
IDInside diameter, SCH 1604.313 in109.55 mm
IDInside diameter, XXS4.063 in103.20 mm
Weight, SCH 4014.63 lb/ft21.77 kg/m
Weight, SCH 8020.80 lb/ft30.95 kg/m

Also known as

DN1255"125A

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.