1/16-27 NPT Thread Dimensions

Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1

1/16-27 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 27 TPI (0.941 mm) and an outside diameter of about 7.938 mm (0.313 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 4.1 mm (0.160 in).

nThreads per inch
0.941 mm27 TPI27 TPI0.941 mm
DOutside diameter (pipe OD / major Ø)
7.938 mm0.313 in0.313 in7.938 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
4.1 mm0.160 in0.160 in4.1 mm
Tap drill (typical)
1/4 in (6.4 mm)

Drawing

gauge planeL₁ 4.1 mmL₁ 0.160 in⌀7.938 mm⌀0.313 inTaper 1:16 on diameter (exaggerated)
60°P = 0.941 mmP = 27 TPIFlat crests and roots (NPT)
NPT: 60° thread on a 1:16 taper. L₁ is the hand-tight engagement from the small end to the gauge plane.Proportions shown, not to scale · Dimensions in mmDimensions in inches

1/16-27 NPT specifications

nThreads per inch27 TPI0.941 mm
DOutside diameter (pipe OD / major Ø)7.938 mm0.313 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)4.1 mm0.160 in
L₂Effective thread length (L2)6.6 mm0.2611 in
Tap drill (typical)1/4 in (6.4 mm)
Thread angle60°
FormTapered 1:16 on diameter

BSP thread of the same nominal size (not interchangeable)

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.