3/8-18 NPT Thread Dimensions

Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1

3/8-18 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 18 TPI (1.411 mm) and an outside diameter of about 17.145 mm (0.675 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 6.1 mm (0.240 in).

nThreads per inch
1.411 mm18 TPI18 TPI1.411 mm
DOutside diameter (pipe OD / major Ø)
17.145 mm0.675 in0.675 in17.145 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
6.1 mm0.240 in0.240 in6.1 mm
Tap drill (typical)
37/64 in (14.7 mm)

Drawing

gauge planeL₁ 6.1 mmL₁ 0.240 in⌀17.145 mm⌀0.675 inTaper 1:16 on diameter (exaggerated)
60°P = 1.411 mmP = 18 TPIFlat crests and roots (NPT)
NPT: 60° thread on a 1:16 taper. L₁ is the hand-tight engagement from the small end to the gauge plane.Proportions shown, not to scale · Dimensions in mmDimensions in inches

3/8-18 NPT specifications

nThreads per inch18 TPI1.411 mm
DOutside diameter (pipe OD / major Ø)17.145 mm0.675 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)6.1 mm0.240 in
L₂Effective thread length (L2)10.4 mm0.4078 in
Tap drill (typical)37/64 in (14.7 mm)
Thread angle60°
FormTapered 1:16 on diameter

BSP thread of the same nominal size (not interchangeable)

Pipe this thread is cut on

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.