G 1/4 BSP Thread Dimensions

Pipe Threads · BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc

G 1/4 BSP (BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc) has 1.337 mm (19 TPI) and an outside diameter of about 13.157 mm (0.518 in). Thread form: G parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal, 55° flank angle. Engagement length 6 mm (0.236 in).

nThreads per inch
1.337 mm19 TPI19 TPI1.337 mm
DOutside diameter (pipe OD / major Ø)
13.157 mm0.518 in0.518 in13.157 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
6 mm0.236 in0.236 in6 mm
Tap drill (typical)
11.8 mm

Drawing

gauge planeL₁ 6 mmL₁ 0.236 in⌀13.157 mm⌀0.518 inG: parallel · R: taper 1:16
55°P = 1.337 mmP = 19 TPIRounded crests and roots (Whitworth)
BSP: 55° Whitworth thread. G is parallel; R (external) and Rc (internal) taper 1:16 with the gauge length L₁ shown.Proportions shown, not to scale · Dimensions in mmDimensions in inches

G 1/4 BSP specifications

nThreads per inch19 TPI1.337 mm
DOutside diameter (pipe OD / major Ø)13.157 mm0.518 in
d₁Minor diameter11.445 mm0.451 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)6 mm0.236 in
Tap drill (typical)11.8 mm
Thread angle55°
FormG parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal

G 1/4 (19 TPI) is the usual port for pressure gauges and pneumatics outside North America. It does not fit 1/4-18 NPT.

Also known as

G1/4R1/4Rp1/4Rc1/4

NPT thread of the same nominal size (not interchangeable)

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.