G 1/8 BSP Thread Dimensions

Pipe Threads · BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc

G 1/8 BSP (BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc) has 0.907 mm (28 TPI) and an outside diameter of about 9.728 mm (0.383 in). Thread form: G parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal, 55° flank angle. Engagement length 4 mm (0.157 in).

nThreads per inch
0.907 mm28 TPI28 TPI0.907 mm
DOutside diameter (pipe OD / major Ø)
9.728 mm0.383 in0.383 in9.728 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
4 mm0.157 in0.157 in4 mm
Tap drill (typical)
8.8 mm

Drawing

gauge planeL₁ 4 mmL₁ 0.157 in⌀9.728 mm⌀0.383 inG: parallel · R: taper 1:16
55°P = 0.907 mmP = 28 TPIRounded crests and roots (Whitworth)
BSP: 55° Whitworth thread. G is parallel; R (external) and Rc (internal) taper 1:16 with the gauge length L₁ shown.Proportions shown, not to scale · Dimensions in mmDimensions in inches

G 1/8 BSP specifications

nThreads per inch28 TPI0.907 mm
DOutside diameter (pipe OD / major Ø)9.728 mm0.383 in
d₁Minor diameter8.566 mm0.337 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)4 mm0.157 in
Tap drill (typical)8.8 mm
Thread angle55°
FormG parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal

Also known as

G1/8R1/8Rp1/8Rc1/8

NPT thread of the same nominal size (not interchangeable)

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.