G 3 BSP Thread Dimensions

Pipe Threads · BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc

G 3 BSP (BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc) has 2.309 mm (11 TPI) and an outside diameter of about 87.884 mm (3.460 in). Thread form: G parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal, 55° flank angle. Engagement length 20.6 mm (0.811 in).

nThreads per inch
2.309 mm11 TPI11 TPI2.309 mm
DOutside diameter (pipe OD / major Ø)
87.884 mm3.460 in3.460 in87.884 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
20.6 mm0.811 in0.811 in20.6 mm

Drawing

gauge planeL₁ 20.6 mmL₁ 0.811 in⌀87.884 mm⌀3.460 inG: parallel · R: taper 1:16
55°P = 2.309 mmP = 11 TPIRounded crests and roots (Whitworth)
BSP: 55° Whitworth thread. G is parallel; R (external) and Rc (internal) taper 1:16 with the gauge length L₁ shown.Proportions shown, not to scale · Dimensions in mmDimensions in inches

G 3 BSP specifications

nThreads per inch11 TPI2.309 mm
DOutside diameter (pipe OD / major Ø)87.884 mm3.460 in
d₁Minor diameter84.927 mm3.344 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)20.6 mm0.811 in
Thread angle55°
FormG parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal

Also known as

G3R3Rp3Rc3

NPT thread of the same nominal size (not interchangeable)

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.