3-8 NPT Thread Dimensions
Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1
3-8 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 8 TPI (3.175 mm) and an outside diameter of about 88.900 mm (3.500 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 19.5 mm (0.766 in).
- nThreads per inch
- 3.175 mm8 TPI8 TPI3.175 mm
- DOutside diameter (pipe OD / major Ø)
- 88.900 mm3.500 in3.500 in88.900 mm
- L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
- 19.5 mm0.766 in0.766 in19.5 mm
- Tap drill (typical)
- 3-1/4 in (82.6 mm)
Drawing
3-8 NPT specifications
| nThreads per inch | 8 TPI3.175 mm |
|---|---|
| DOutside diameter (pipe OD / major Ø) | 88.900 mm3.500 in |
| L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length) | 19.5 mm0.766 in |
| L₂Effective thread length (L2) | 30.5 mm1.2000 in |
| Tap drill (typical) | 3-1/4 in (82.6 mm) |
| Thread angle | 60° |
| Form | Tapered 1:16 on diameter |
BSP thread of the same nominal size (not interchangeable)
Pipe this thread is cut on
All Pipe Threads sizes
Sources
- ASME B1.20.1: Pipe Threads, General Purpose, Inch
- ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
- ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
- Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
- Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.