Type A Plug: Dimensions, Rating and Where It Is Used

Plug Types

Type A (NEMA 1-15, ANSI/NEMA WD 6) has 2 pins and is rated 15 A at 125 V. Sockets of this type also accept: A. Main countries: USA, Canada, Mexico, Japan, Taiwan, Philippines, Central America.

Pins
2
sPin spacing (L–N centres)
12.7 mm0.500 in0.500 in12.7 mm
Rated current
15 A
Rated voltage
125 V

Drawing

12.7 mm0.500 inPin face (looking at the pins)
Pins as seen looking into the plug face. Body outline schematic.Drawn to scale · Dimensions in mmDimensions in inches

Type A specifications

Pins2
EarthedNo
Rated voltage125 V
Rated current15 A
Pin shapeFlat blades
Pin cross-section6.35 × 1.52 mm
sPin spacing (L–N centres)12.7 mm0.500 in
StandardNEMA 1-15 (ANSI/NEMA WD 6)
Socket also acceptsA
Main countriesUSA, Canada, Mexico, Japan, Taiwan, Philippines, Central America

Most Type A plugs are polarised: the neutral blade is wider (7.9 mm) than the live blade (6.35 mm), so it goes in only one way. Old unpolarised sockets accept only plugs with two equal narrow blades. Japan uses the same shape, but many Japanese sockets are unpolarised, so a polarised US plug may not fit.

Sockets that also accept a Type A plug

All plug types

All 15 plug types A–O →

Sources

  1. IEC: World Plugs (plug and socket types A–O by country)
  2. IEC TR 60083: Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
  3. BS 1363-1: 13 A plugs, socket-outlets, adaptors and connection units
  4. NEMA WD 6: Wiring Devices, Dimensional Specifications
  5. Museum of Plugs and Sockets (plugsocketmuseum.nl): dimension tables for national standards
  6. WorldStandards: Plug and socket types

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.