Type B Plug: Dimensions, Rating and Where It Is Used

Plug Types

Type B (NEMA 5-15, ANSI/NEMA WD 6) has 3 pins and is rated 15 A at 125 V. Sockets of this type also accept: A, B. Main countries: USA, Canada, Mexico, Japan, Taiwan, Caribbean.

Pins
3
sPin spacing (L–N centres)
12.7 mm0.500 in0.500 in12.7 mm
Rated current
15 A
Rated voltage
125 V

Drawing

12.7 mm0.500 in⌀4.76 mm⌀0.187 inPin face (looking at the pins)
Pins as seen looking into the plug face. Earth pin position approximate; body outline schematic.Drawn to scale · Dimensions in mmDimensions in inches

Type B specifications

Pins3
EarthedYes
Rated voltage125 V
Rated current15 A
Pin shapeFlat blades
Pin cross-section6.35 × 1.52 mm
sPin spacing (L–N centres)12.7 mm0.500 in
Earth pin diameter4.76 mm0.187 in
StandardNEMA 5-15 (ANSI/NEMA WD 6)
Socket also acceptsA, B
Main countriesUSA, Canada, Mexico, Japan, Taiwan, Caribbean

A Type B plug does not fit a two-slot Type A socket because the earth pin is in the way. Never cut or bend it off; use a socket with an earth contact. Japan's three-pin JIS C 8303 plug is dimensionally the same.

Other plugs that fit a Type B socket

All plug types

All 15 plug types A–O →

Sources

  1. IEC: World Plugs (plug and socket types A–O by country)
  2. IEC TR 60083: Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
  3. BS 1363-1: 13 A plugs, socket-outlets, adaptors and connection units
  4. NEMA WD 6: Wiring Devices, Dimensional Specifications
  5. Museum of Plugs and Sockets (plugsocketmuseum.nl): dimension tables for national standards
  6. WorldStandards: Plug and socket types

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.