#4 Rebar Size, Area and Weight

Rebar Sizes · US inch-pound bars, ASTM A615 / A706

#4 reinforcing bar (US inch-pound bars, ASTM A615 / A706) has a nominal diameter of 12.7 mm (0.500 in), a nominal cross-section of 129 mm² (0.200 in²) and weighs 0.994 kg/m (0.668 lb/ft).

dNominal diameter
12.7 mm0.500 in0.500 in12.7 mm
Nominal weight
0.994 kg/m0.668 lb/ft0.668 lb/ft0.994 kg/m

Drawing

⌀12.7 mm⌀0.500 inA = 129 mm²A = 0.200 in²Ribbed bar, side view
Nominal section and side view, all bars drawn at the same scale (the largest bar fills the frame). Ribs schematic; the diameter over the ribs is about 5–15 % larger.Drawn to scale · Dimensions in mmDimensions in inches

#4 specifications

dNominal diameter12.7 mm0.500 in
ANominal area129 mm²0.200 in²
Nominal weight0.994 kg/m0.668 lb/ft
Soft-metric size (A615M)#13

#4 bar: 1/2 in (12.7 mm), 0.20 in², 0.668 lb/ft. A 20-ft stick weighs about 13.4 lb. Soft-metric mark: 13.

Also known as

#13

Nearest bars by area in the other systems

All Rebar Sizes sizes

Compare all 31 sizes in the Rebar Sizes chart →

Sources

  1. ASTM A615/A615M: Deformed and plain carbon-steel bars for concrete reinforcement (Table 1, bar designations)
  2. CRSI: Concrete Reinforcing Steel Institute, ASTM standard reinforcing bars
  3. EN 10080:2005 / ISO 6935-2: Steel for the reinforcement of concrete, nominal sizes and masses
  4. CSA G30.18: Carbon steel bars for concrete reinforcement (metric bar designations)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.