#5 Rebar Size, Area and Weight

Rebar Sizes · US inch-pound bars, ASTM A615 / A706

#5 reinforcing bar (US inch-pound bars, ASTM A615 / A706) has a nominal diameter of 15.9 mm (0.625 in), a nominal cross-section of 200 mm² (0.310 in²) and weighs 1.552 kg/m (1.043 lb/ft).

dNominal diameter
15.9 mm0.625 in0.625 in15.9 mm
Nominal weight
1.552 kg/m1.043 lb/ft1.043 lb/ft1.552 kg/m

Drawing

⌀15.9 mm⌀0.625 inA = 200 mm²A = 0.310 in²Ribbed bar, side view
Nominal section and side view, all bars drawn at the same scale (the largest bar fills the frame). Ribs schematic; the diameter over the ribs is about 5–15 % larger.Drawn to scale · Dimensions in mmDimensions in inches

#5 specifications

dNominal diameter15.9 mm0.625 in
ANominal area200 mm²0.310 in²
Nominal weight1.552 kg/m1.043 lb/ft
Soft-metric size (A615M)#16

#5 bar: 5/8 in (15.9 mm), 0.31 in², 1.043 lb/ft. A 20-ft stick weighs about 20.9 lb. Its area (200 mm²) equals Canadian 15M.

Also known as

#16

Nearest bars by area in the other systems

All Rebar Sizes sizes

Compare all 31 sizes in the Rebar Sizes chart →

Sources

  1. ASTM A615/A615M: Deformed and plain carbon-steel bars for concrete reinforcement (Table 1, bar designations)
  2. CRSI: Concrete Reinforcing Steel Institute, ASTM standard reinforcing bars
  3. EN 10080:2005 / ISO 6935-2: Steel for the reinforcement of concrete, nominal sizes and masses
  4. CSA G30.18: Carbon steel bars for concrete reinforcement (metric bar designations)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.