DIN 6799 – 1.9 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 1.9 ring (DIN 6799: E-clips, retaining washers) needs a groove 1.9 mm (0.075 in) in diameter and at least 0.54 mm (0.0213 in) wide. The ring itself is 0.5 mm (0.0197 in) thick.

d2Groove diameter
1.9 mm0.075 in0.075 in1.9 mm
mGroove width (min)
0.54 mm0.0213 in0.0213 in0.54 mm
sRing thickness
0.5 mm0.0197 in0.0197 in0.5 mm

Drawing

⌀2.5 mm⌀0.098 in
m 0.54 mmm 0.0213 int 0.3 mmt 0.0118 ins 0.5 mms 0.0197 inShaft surfacegroove ⌀1.9 mmgroove ⌀0.075 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 1.9 specifications

d1Shaft range (E-clip)2.5–3 mm0.098–0.118 in
d2Groove diameter1.9 mm0.075 in
mGroove width (min)0.54 mm0.0213 in
sRing thickness0.5 mm0.0197 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.