DIN 6799 – 30 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 30 ring (DIN 6799: E-clips, retaining washers) needs a groove 30 mm (1.181 in) in diameter and at least 2.55 mm (0.1004 in) wide. The ring itself is 2.5 mm (0.0984 in) thick.

d2Groove diameter
30 mm1.181 in1.181 in30 mm
mGroove width (min)
2.55 mm0.1004 in0.1004 in2.55 mm
sRing thickness
2.5 mm0.0984 in0.0984 in2.5 mm

Drawing

⌀32 mm⌀1.260 in
m 2.55 mmm 0.1004 int 1 mmt 0.0394 ins 2.5 mms 0.0984 inShaft surfacegroove ⌀30 mmgroove ⌀1.181 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 30 specifications

d1Shaft range (E-clip)32–42 mm1.260–1.654 in
d2Groove diameter30 mm1.181 in
mGroove width (min)2.55 mm0.1004 in
sRing thickness2.5 mm0.0984 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.