DIN 6799 – 24 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 24 ring (DIN 6799: E-clips, retaining washers) needs a groove 24 mm (0.945 in) in diameter and at least 2.05 mm (0.0807 in) wide. The ring itself is 2 mm (0.0787 in) thick.

d2Groove diameter
24 mm0.945 in0.945 in24 mm
mGroove width (min)
2.05 mm0.0807 in0.0807 in2.05 mm
sRing thickness
2 mm0.0787 in0.0787 in2 mm

Drawing

⌀25 mm⌀0.984 in
m 2.05 mmm 0.0807 int 0.5 mmt 0.0197 ins 2 mms 0.0787 inShaft surfacegroove ⌀24 mmgroove ⌀0.945 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 24 specifications

d1Shaft range (E-clip)25–38 mm0.984–1.496 in
d2Groove diameter24 mm0.945 in
mGroove width (min)2.05 mm0.0807 in
sRing thickness2 mm0.0787 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.