DIN 6799 – 5 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 5 ring (DIN 6799: E-clips, retaining washers) needs a groove 5 mm (0.197 in) in diameter and at least 0.74 mm (0.0291 in) wide. The ring itself is 0.7 mm (0.0276 in) thick.

d2Groove diameter
5 mm0.197 in0.197 in5 mm
mGroove width (min)
0.74 mm0.0291 in0.0291 in0.74 mm
sRing thickness
0.7 mm0.0276 in0.0276 in0.7 mm

Drawing

⌀6 mm⌀0.236 in
m 0.74 mmm 0.0291 int 0.5 mmt 0.0197 ins 0.7 mms 0.0276 inShaft surfacegroove ⌀5 mmgroove ⌀0.197 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 5 specifications

d1Shaft range (E-clip)6–8 mm0.236–0.315 in
d2Groove diameter5 mm0.197 in
mGroove width (min)0.74 mm0.0291 in
sRing thickness0.7 mm0.0276 in

E-clip size 5: 5 mm groove, for 6–8 mm shafts, 0.7 mm thick.

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.