DIN 6799 – 6 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 6 ring (DIN 6799: E-clips, retaining washers) needs a groove 6 mm (0.236 in) in diameter and at least 0.74 mm (0.0291 in) wide. The ring itself is 0.7 mm (0.0276 in) thick.

d2Groove diameter
6 mm0.236 in0.236 in6 mm
mGroove width (min)
0.74 mm0.0291 in0.0291 in0.74 mm
sRing thickness
0.7 mm0.0276 in0.0276 in0.7 mm

Drawing

⌀7 mm⌀0.276 in
m 0.74 mmm 0.0291 int 0.5 mmt 0.0197 ins 0.7 mms 0.0276 inShaft surfacegroove ⌀6 mmgroove ⌀0.236 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 6 specifications

d1Shaft range (E-clip)7–9 mm0.276–0.354 in
d2Groove diameter6 mm0.236 in
mGroove width (min)0.74 mm0.0291 in
sRing thickness0.7 mm0.0276 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.