DIN 6799 – 7 Circlip Groove Dimensions
Retaining Rings · DIN 6799: E-clips (retaining washers)
The DIN 6799 – 7 ring (DIN 6799: E-clips, retaining washers) needs a groove 7 mm (0.276 in) in diameter and at least 0.94 mm (0.0370 in) wide. The ring itself is 0.9 mm (0.0354 in) thick.
- d2Groove diameter
- 7 mm0.276 in0.276 in7 mm
- mGroove width (min)
- 0.94 mm0.0370 in0.0370 in0.94 mm
- sRing thickness
- 0.9 mm0.0354 in0.0354 in0.9 mm
Drawing
DIN 6799 – 7 specifications
| d1Shaft range (E-clip) | 8–11 mm0.315–0.433 in |
|---|---|
| d2Groove diameter | 7 mm0.276 in |
| mGroove width (min) | 0.94 mm0.0370 in |
| sRing thickness | 0.9 mm0.0354 in |
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.