DIN 6799 – 9 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 9 ring (DIN 6799: E-clips, retaining washers) needs a groove 9 mm (0.354 in) in diameter and at least 1.15 mm (0.0453 in) wide. The ring itself is 1.1 mm (0.0433 in) thick.

d2Groove diameter
9 mm0.354 in0.354 in9 mm
mGroove width (min)
1.15 mm0.0453 in0.0453 in1.15 mm
sRing thickness
1.1 mm0.0433 in0.0433 in1.1 mm

Drawing

⌀10 mm⌀0.394 in
m 1.15 mmm 0.0453 int 0.5 mmt 0.0197 ins 1.1 mms 0.0433 inShaft surfacegroove ⌀9 mmgroove ⌀0.354 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 9 specifications

d1Shaft range (E-clip)10–14 mm0.394–0.551 in
d2Groove diameter9 mm0.354 in
mGroove width (min)1.15 mm0.0453 in
sRing thickness1.1 mm0.0433 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.