DIN 6799 – 10 Circlip Groove Dimensions
Retaining Rings · DIN 6799: E-clips (retaining washers)
The DIN 6799 – 10 ring (DIN 6799: E-clips, retaining washers) needs a groove 10 mm (0.394 in) in diameter and at least 1.25 mm (0.0492 in) wide. The ring itself is 1.2 mm (0.0472 in) thick.
- d2Groove diameter
- 10 mm0.394 in0.394 in10 mm
- mGroove width (min)
- 1.25 mm0.0492 in0.0492 in1.25 mm
- sRing thickness
- 1.2 mm0.0472 in0.0472 in1.2 mm
Drawing
DIN 6799 – 10 specifications
| d1Shaft range (E-clip) | 11–15 mm0.433–0.591 in |
|---|---|
| d2Groove diameter | 10 mm0.394 in |
| mGroove width (min) | 1.25 mm0.0492 in |
| sRing thickness | 1.2 mm0.0472 in |
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.