M10×7.5 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M10×7.5 is an AISC M shapes: miscellaneous light beams shape. It is 9.99 in (253.7 mm) deep with a 2.69 in (68.3 mm) flange, a 0.13 in (3.3 mm) web and an average flange thickness of 0.173 in (4.4 mm), and weighs 7.5 lb/ft (11.2 kg/m). Area 2.22 in² (1,432 mm²); Ix = 33 in⁴ (1,373.6 cm⁴), Sx = 6.6 in³ (108.2 cm³), Zx = 7.77 in³ (127.3 cm³).

dDepth
253.7 mm9.99 in9.99 in253.7 mm
bfFlange width
68.3 mm2.69 in2.69 in68.3 mm
twWeb thickness
3.3 mm0.13 in0.13 in3.3 mm
tfFlange thickness
4.4 mm0.173 in0.173 in4.4 mm

Drawing

68.3 mm2.69 in253.7 mm9.99 intf 4.4 mmtf 0.173 intw 3.3 mmtw 0.13 ink 11.1 mmk 0.438 in
Drawn to scale · Dimensions in mmDimensions in inches

M10×7.5 specifications

dDepth9.99 in253.7 mm
bfFlange width2.69 in68.3 mm
twWeb thickness0.13 in3.3 mm
tfFlange thickness0.173 in4.4 mm
kDesign value0.438 in11.1 mm
kDetailing value7/16 in11.1 mm
k1Detailing value5/16 in7.9 mm
WWeight7.5 lb/ft11.2 kg/m
AArea2.22 in²1,432 mm²
IxMoment of inertia, strong axis33 in⁴1,373.6 cm⁴
ZxPlastic modulus, strong axis7.77 in³127.3 cm³
SxSection modulus, strong axis6.6 in³108.2 cm³
rxRadius of gyration, strong axis3.85 in97.8 mm
IyMoment of inertia, weak axis0.562 in⁴23.4 cm⁴
ZyPlastic modulus, weak axis0.67 in³11 cm³
SySection modulus, weak axis0.418 in³6.8 cm³
ryRadius of gyration, weak axis0.5 in12.8 mm
JTorsional constant0.019 in⁴0.78 cm⁴
bf/2tfFlange slenderness7.77
h/twWeb slenderness71

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.