S3×7.5 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S3×7.5 is an AISC S shapes: American Standard beams shape. It is 3 in (76.2 mm) deep with a 2.51 in (63.8 mm) flange, a 0.349 in (8.9 mm) web and an average flange thickness of 0.26 in (6.6 mm), and weighs 7.5 lb/ft (11.2 kg/m). Area 2.2 in² (1,419 mm²); Ix = 2.91 in⁴ (121.1 cm⁴), Sx = 1.94 in³ (31.8 cm³), Zx = 2.35 in³ (38.5 cm³).

dDepth
76.2 mm3 in3 in76.2 mm
bfFlange width
63.8 mm2.51 in2.51 in63.8 mm
twWeb thickness
8.9 mm0.349 in0.349 in8.9 mm
tfFlange thickness
6.6 mm0.26 in0.26 in6.6 mm

Drawing

63.8 mm2.51 in76.2 mm3 intf 6.6 mmtf 0.26 intw 8.9 mmtw 0.349 ink 15.9 mmk 0.625 in
Drawn to scale · Dimensions in mmDimensions in inches

S3×7.5 specifications

dDepth3 in76.2 mm
bfFlange width2.51 in63.8 mm
twWeb thickness0.349 in8.9 mm
tfFlange thickness0.26 in6.6 mm
kDesign value0.625 in15.9 mm
kDetailing value5/8 in15.9 mm
WWeight7.5 lb/ft11.2 kg/m
AArea2.2 in²1,419 mm²
IxMoment of inertia, strong axis2.91 in⁴121.1 cm⁴
ZxPlastic modulus, strong axis2.35 in³38.5 cm³
SxSection modulus, strong axis1.94 in³31.8 cm³
rxRadius of gyration, strong axis1.15 in29.2 mm
IyMoment of inertia, weak axis0.578 in⁴24.1 cm⁴
ZyPlastic modulus, weak axis0.821 in³13.5 cm³
SySection modulus, weak axis0.461 in³7.6 cm³
ryRadius of gyration, weak axis0.51 in13.0 mm
JTorsional constant0.09 in⁴3.73 cm⁴
bf/2tfFlange slenderness4.83
h/twWeb slenderness5.4
Metric designationS75×11.2

Also known as

S75×11.2

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.