M10×8 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M10×8 is an AISC M shapes: miscellaneous light beams shape. It is 9.95 in (252.7 mm) deep with a 2.69 in (68.3 mm) flange, a 0.141 in (3.6 mm) web and an average flange thickness of 0.182 in (4.6 mm), and weighs 8 lb/ft (11.9 kg/m). Area 2.37 in² (1,529 mm²); Ix = 34.6 in⁴ (1,440.2 cm⁴), Sx = 6.95 in³ (113.9 cm³), Zx = 8.2 in³ (134.4 cm³).

dDepth
252.7 mm9.95 in9.95 in252.7 mm
bfFlange width
68.3 mm2.69 in2.69 in68.3 mm
twWeb thickness
3.6 mm0.141 in0.141 in3.6 mm
tfFlange thickness
4.6 mm0.182 in0.182 in4.6 mm

Drawing

68.3 mm2.69 in252.7 mm9.95 intf 4.6 mmtf 0.182 intw 3.6 mmtw 0.141 ink 14.3 mmk 0.563 in
Drawn to scale · Dimensions in mmDimensions in inches

M10×8 specifications

dDepth9.95 in252.7 mm
bfFlange width2.69 in68.3 mm
twWeb thickness0.141 in3.6 mm
tfFlange thickness0.182 in4.6 mm
kDesign value0.563 in14.3 mm
kDetailing value9/16 in14.3 mm
k1Detailing value3/8 in9.5 mm
WWeight8 lb/ft11.9 kg/m
AArea2.37 in²1,529 mm²
IxMoment of inertia, strong axis34.6 in⁴1,440.2 cm⁴
ZxPlastic modulus, strong axis8.2 in³134.4 cm³
SxSection modulus, strong axis6.95 in³113.9 cm³
rxRadius of gyration, strong axis3.82 in97.0 mm
IyMoment of inertia, weak axis0.593 in⁴24.7 cm⁴
ZyPlastic modulus, weak axis0.711 in³11.7 cm³
SySection modulus, weak axis0.441 in³7.2 cm³
ryRadius of gyration, weak axis0.5 in12.7 mm
JTorsional constant0.022 in⁴0.93 cm⁴
bf/2tfFlange slenderness7.39
h/twWeb slenderness65

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.