M12×10.8 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M12×10.8 is an AISC M shapes: miscellaneous light beams shape. It is 12 in (304.8 mm) deep with a 3.07 in (78.0 mm) flange, a 0.16 in (4.1 mm) web and an average flange thickness of 0.21 in (5.3 mm), and weighs 10.8 lb/ft (16.1 kg/m). Area 3.18 in² (2,052 mm²); Ix = 66.7 in⁴ (2,776.3 cm⁴), Sx = 11.1 in³ (181.9 cm³), Zx = 13.2 in³ (216.3 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
78.0 mm3.07 in3.07 in78.0 mm
twWeb thickness
4.1 mm0.16 in0.16 in4.1 mm
tfFlange thickness
5.3 mm0.21 in0.21 in5.3 mm

Drawing

78.0 mm3.07 in304.8 mm12 intf 5.3 mmtf 0.21 intw 4.1 mmtw 0.16 ink 14.3 mmk 0.563 in
Drawn to scale · Dimensions in mmDimensions in inches

M12×10.8 specifications

dDepth12 in304.8 mm
bfFlange width3.07 in78.0 mm
twWeb thickness0.16 in4.1 mm
tfFlange thickness0.21 in5.3 mm
kDesign value0.563 in14.3 mm
kDetailing value9/16 in14.3 mm
k1Detailing value3/8 in9.5 mm
WWeight10.8 lb/ft16.1 kg/m
AArea3.18 in²2,052 mm²
IxMoment of inertia, strong axis66.7 in⁴2,776.3 cm⁴
ZxPlastic modulus, strong axis13.2 in³216.3 cm³
SxSection modulus, strong axis11.1 in³181.9 cm³
rxRadius of gyration, strong axis4.58 in116.3 mm
IyMoment of inertia, weak axis1.01 in⁴42 cm⁴
ZyPlastic modulus, weak axis1.07 in³17.5 cm³
SySection modulus, weak axis0.661 in³10.8 cm³
ryRadius of gyration, weak axis0.56 in14.3 mm
JTorsional constant0.039 in⁴1.64 cm⁴
bf/2tfFlange slenderness7.3
h/twWeb slenderness69.2

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.