S5×10 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S5×10 is an AISC S shapes: American Standard beams shape. It is 5 in (127.0 mm) deep with a 3 in (76.2 mm) flange, a 0.214 in (5.4 mm) web and an average flange thickness of 0.326 in (8.3 mm), and weighs 10 lb/ft (14.9 kg/m). Area 2.93 in² (1,890 mm²); Ix = 12.3 in⁴ (512 cm⁴), Sx = 4.9 in³ (80.3 cm³), Zx = 5.66 in³ (92.8 cm³).

dDepth
127.0 mm5 in5 in127.0 mm
bfFlange width
76.2 mm3 in3 in76.2 mm
twWeb thickness
5.4 mm0.214 in0.214 in5.4 mm
tfFlange thickness
8.3 mm0.326 in0.326 in8.3 mm

Drawing

76.2 mm3 in127.0 mm5 intf 8.3 mmtf 0.326 intw 5.4 mmtw 0.214 ink 19.0 mmk 0.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S5×10 specifications

dDepth5 in127.0 mm
bfFlange width3 in76.2 mm
twWeb thickness0.214 in5.4 mm
tfFlange thickness0.326 in8.3 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight10 lb/ft14.9 kg/m
AArea2.93 in²1,890 mm²
IxMoment of inertia, strong axis12.3 in⁴512 cm⁴
ZxPlastic modulus, strong axis5.66 in³92.8 cm³
SxSection modulus, strong axis4.9 in³80.3 cm³
rxRadius of gyration, strong axis2.05 in52.1 mm
IyMoment of inertia, weak axis1.19 in⁴49.5 cm⁴
ZyPlastic modulus, weak axis1.37 in³22.5 cm³
SySection modulus, weak axis0.795 in³13 cm³
ryRadius of gyration, weak axis0.64 in16.2 mm
JTorsional constant0.114 in⁴4.75 cm⁴
bf/2tfFlange slenderness4.61
h/twWeb slenderness16.8
Metric designationS130×15

Also known as

S130×15

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.