M12×10 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M12×10 is an AISC M shapes: miscellaneous light beams shape. It is 12 in (304.8 mm) deep with a 3.25 in (82.6 mm) flange, a 0.149 in (3.8 mm) web and an average flange thickness of 0.18 in (4.6 mm), and weighs 10 lb/ft (14.9 kg/m). Area 2.95 in² (1,903 mm²); Ix = 61.7 in⁴ (2,568.1 cm⁴), Sx = 10.3 in³ (168.8 cm³), Zx = 12.2 in³ (199.9 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
82.6 mm3.25 in3.25 in82.6 mm
twWeb thickness
3.8 mm0.149 in0.149 in3.8 mm
tfFlange thickness
4.6 mm0.18 in0.18 in4.6 mm

Drawing

82.6 mm3.25 in304.8 mm12 intf 4.6 mmtf 0.18 intw 3.8 mmtw 0.149 ink 12.7 mmk 0.5 in
Drawn to scale · Dimensions in mmDimensions in inches

M12×10 specifications

dDepth12 in304.8 mm
bfFlange width3.25 in82.6 mm
twWeb thickness0.149 in3.8 mm
tfFlange thickness0.18 in4.6 mm
kDesign value0.5 in12.7 mm
kDetailing value1/2 in12.7 mm
k1Detailing value3/8 in9.5 mm
WWeight10 lb/ft14.9 kg/m
AArea2.95 in²1,903 mm²
IxMoment of inertia, strong axis61.7 in⁴2,568.1 cm⁴
ZxPlastic modulus, strong axis12.2 in³199.9 cm³
SxSection modulus, strong axis10.3 in³168.8 cm³
rxRadius of gyration, strong axis4.57 in116.1 mm
IyMoment of inertia, weak axis1.03 in⁴42.9 cm⁴
ZyPlastic modulus, weak axis1.02 in³16.7 cm³
SySection modulus, weak axis0.636 in³10.4 cm³
ryRadius of gyration, weak axis0.59 in15.0 mm
JTorsional constant0.029 in⁴1.22 cm⁴
bf/2tfFlange slenderness9.03
h/twWeb slenderness74.7

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.