S12×50 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S12×50 is an AISC S shapes: American Standard beams shape. It is 12 in (304.8 mm) deep with a 5.48 in (139.2 mm) flange, a 0.687 in (17.4 mm) web and an average flange thickness of 0.659 in (16.7 mm), and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); Ix = 303 in⁴ (12,611.8 cm⁴), Sx = 50.6 in³ (829.2 cm³), Zx = 60.9 in³ (998 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
139.2 mm5.48 in5.48 in139.2 mm
twWeb thickness
17.4 mm0.687 in0.687 in17.4 mm
tfFlange thickness
16.7 mm0.659 in0.659 in16.7 mm

Drawing

139.2 mm5.48 in304.8 mm12 intf 16.7 mmtf 0.659 intw 17.4 mmtw 0.687 ink 36.6 mmk 1.44 in
Drawn to scale · Dimensions in mmDimensions in inches

S12×50 specifications

dDepth12 in304.8 mm
bfFlange width5.48 in139.2 mm
twWeb thickness0.687 in17.4 mm
tfFlange thickness0.659 in16.7 mm
kDesign value1.44 in36.6 mm
kDetailing value1 7/16 in36.5 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
IxMoment of inertia, strong axis303 in⁴12,611.8 cm⁴
ZxPlastic modulus, strong axis60.9 in³998 cm³
SxSection modulus, strong axis50.6 in³829.2 cm³
rxRadius of gyration, strong axis4.55 in115.6 mm
IyMoment of inertia, weak axis15.6 in⁴649.3 cm⁴
ZyPlastic modulus, weak axis10.3 in³168.8 cm³
SySection modulus, weak axis5.69 in³93.2 cm³
ryRadius of gyration, weak axis1.03 in26.2 mm
JTorsional constant2.77 in⁴115.3 cm⁴
bf/2tfFlange slenderness4.16
h/twWeb slenderness13.7
Metric designationS310×74

Also known as

S310×74

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.