S18×54.7 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S18×54.7 is an AISC S shapes: American Standard beams shape. It is 18 in (457.2 mm) deep with a 6 in (152.4 mm) flange, a 0.461 in (11.7 mm) web and an average flange thickness of 0.691 in (17.6 mm), and weighs 54.7 lb/ft (81.4 kg/m). Area 16 in² (10,323 mm²); Ix = 801 in⁴ (33,340.1 cm⁴), Sx = 89 in³ (1458.4 cm³), Zx = 104 in³ (1704.3 cm³).

dDepth
457.2 mm18 in18 in457.2 mm
bfFlange width
152.4 mm6 in6 in152.4 mm
twWeb thickness
11.7 mm0.461 in0.461 in11.7 mm
tfFlange thickness
17.6 mm0.691 in0.691 in17.6 mm

Drawing

152.4 mm6 in457.2 mm18 intf 17.6 mmtf 0.691 intw 11.7 mmtw 0.461 ink 38.1 mmk 1.5 in
Drawn to scale · Dimensions in mmDimensions in inches

S18×54.7 specifications

dDepth18 in457.2 mm
bfFlange width6 in152.4 mm
twWeb thickness0.461 in11.7 mm
tfFlange thickness0.691 in17.6 mm
kDesign value1.5 in38.1 mm
kDetailing value1 1/2 in38.1 mm
WWeight54.7 lb/ft81.4 kg/m
AArea16 in²10,323 mm²
IxMoment of inertia, strong axis801 in⁴33,340.1 cm⁴
ZxPlastic modulus, strong axis104 in³1704.3 cm³
SxSection modulus, strong axis89 in³1458.4 cm³
rxRadius of gyration, strong axis7.07 in179.6 mm
IyMoment of inertia, weak axis20.7 in⁴861.6 cm⁴
ZyPlastic modulus, weak axis12.1 in³198.3 cm³
SySection modulus, weak axis6.91 in³113.2 cm³
ryRadius of gyration, weak axis1.14 in29.0 mm
JTorsional constant2.33 in⁴96.98 cm⁴
bf/2tfFlange slenderness4.34
h/twWeb slenderness33.2
Metric designationS460×81.4

Also known as

S460×81.4

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.