S20×66 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S20×66 is an AISC S shapes: American Standard beams shape. It is 20 in (508.0 mm) deep with a 6.26 in (159.0 mm) flange, a 0.505 in (12.8 mm) web and an average flange thickness of 0.795 in (20.2 mm), and weighs 66 lb/ft (98.2 kg/m). Area 19.4 in² (12,516 mm²); Ix = 1,190 in⁴ (49,531.5 cm⁴), Sx = 119 in³ (1950.1 cm³), Zx = 139 in³ (2277.8 cm³).

dDepth
508.0 mm20 in20 in508.0 mm
bfFlange width
159.0 mm6.26 in6.26 in159.0 mm
twWeb thickness
12.8 mm0.505 in0.505 in12.8 mm
tfFlange thickness
20.2 mm0.795 in0.795 in20.2 mm

Drawing

159.0 mm6.26 in508.0 mm20 intf 20.2 mmtf 0.795 intw 12.8 mmtw 0.505 ink 41.4 mmk 1.63 in
Drawn to scale · Dimensions in mmDimensions in inches

S20×66 specifications

dDepth20 in508.0 mm
bfFlange width6.26 in159.0 mm
twWeb thickness0.505 in12.8 mm
tfFlange thickness0.795 in20.2 mm
kDesign value1.63 in41.4 mm
kDetailing value1 5/8 in41.3 mm
WWeight66 lb/ft98.2 kg/m
AArea19.4 in²12,516 mm²
IxMoment of inertia, strong axis1,190 in⁴49,531.5 cm⁴
ZxPlastic modulus, strong axis139 in³2277.8 cm³
SxSection modulus, strong axis119 in³1950.1 cm³
rxRadius of gyration, strong axis7.83 in198.9 mm
IyMoment of inertia, weak axis27.5 in⁴1144.6 cm⁴
ZyPlastic modulus, weak axis15.4 in³252.4 cm³
SySection modulus, weak axis8.78 in³143.9 cm³
ryRadius of gyration, weak axis1.19 in30.2 mm
JTorsional constant3.58 in⁴149.01 cm⁴
bf/2tfFlange slenderness3.93
h/twWeb slenderness33.5
Metric designationS510×98.2

Also known as

S510×98.2

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.