S20×96 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S20×96 is an AISC S shapes: American Standard beams shape. It is 20.3 in (515.6 mm) deep with a 7.2 in (182.9 mm) flange, a 0.8 in (20.3 mm) web and an average flange thickness of 0.92 in (23.4 mm), and weighs 96 lb/ft (142.9 kg/m). Area 28.2 in² (18,194 mm²); Ix = 1,670 in⁴ (69,510.6 cm⁴), Sx = 165 in³ (2703.9 cm³), Zx = 198 in³ (3244.6 cm³).

dDepth
515.6 mm20.3 in20.3 in515.6 mm
bfFlange width
182.9 mm7.2 in7.2 in182.9 mm
twWeb thickness
20.3 mm0.8 in0.8 in20.3 mm
tfFlange thickness
23.4 mm0.92 in0.92 in23.4 mm

Drawing

182.9 mm7.2 in515.6 mm20.3 intf 23.4 mmtf 0.92 intw 20.3 mmtw 0.8 ink 44.4 mmk 1.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S20×96 specifications

dDepth20.3 in515.6 mm
bfFlange width7.2 in182.9 mm
twWeb thickness0.8 in20.3 mm
tfFlange thickness0.92 in23.4 mm
kDesign value1.75 in44.4 mm
kDetailing value1 3/4 in44.4 mm
WWeight96 lb/ft142.9 kg/m
AArea28.2 in²18,194 mm²
IxMoment of inertia, strong axis1,670 in⁴69,510.6 cm⁴
ZxPlastic modulus, strong axis198 in³3244.6 cm³
SxSection modulus, strong axis165 in³2703.9 cm³
rxRadius of gyration, strong axis7.71 in195.8 mm
IyMoment of inertia, weak axis49.9 in⁴2077 cm⁴
ZyPlastic modulus, weak axis24.9 in³408 cm³
SySection modulus, weak axis13.9 in³227.8 cm³
ryRadius of gyration, weak axis1.33 in33.8 mm
JTorsional constant8.4 in⁴349.63 cm⁴
bf/2tfFlange slenderness3.91
h/twWeb slenderness21.1
Metric designationS510×143

Also known as

S510×143

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.