S24×100 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S24×100 is an AISC S shapes: American Standard beams shape. It is 24 in (609.6 mm) deep with a 7.25 in (184.1 mm) flange, a 0.745 in (18.9 mm) web and an average flange thickness of 0.87 in (22.1 mm), and weighs 100 lb/ft (148.8 kg/m). Area 29.3 in² (18,903 mm²); Ix = 2,380 in⁴ (99,063.1 cm⁴), Sx = 199 in³ (3261 cm³), Zx = 239 in³ (3916.5 cm³).

dDepth
609.6 mm24 in24 in609.6 mm
bfFlange width
184.1 mm7.25 in7.25 in184.1 mm
twWeb thickness
18.9 mm0.745 in0.745 in18.9 mm
tfFlange thickness
22.1 mm0.87 in0.87 in22.1 mm

Drawing

184.1 mm7.25 in609.6 mm24 intf 22.1 mmtf 0.87 intw 18.9 mmtw 0.745 ink 44.4 mmk 1.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S24×100 specifications

dDepth24 in609.6 mm
bfFlange width7.25 in184.1 mm
twWeb thickness0.745 in18.9 mm
tfFlange thickness0.87 in22.1 mm
kDesign value1.75 in44.4 mm
kDetailing value1 3/4 in44.4 mm
WWeight100 lb/ft148.8 kg/m
AArea29.3 in²18,903 mm²
IxMoment of inertia, strong axis2,380 in⁴99,063.1 cm⁴
ZxPlastic modulus, strong axis239 in³3916.5 cm³
SxSection modulus, strong axis199 in³3261 cm³
rxRadius of gyration, strong axis9.01 in228.9 mm
IyMoment of inertia, weak axis47.4 in⁴1972.9 cm⁴
ZyPlastic modulus, weak axis24 in³393.3 cm³
SySection modulus, weak axis13.1 in³214.7 cm³
ryRadius of gyration, weak axis1.27 in32.3 mm
JTorsional constant7.59 in⁴315.92 cm⁴
bf/2tfFlange slenderness4.16
h/twWeb slenderness27.8
Metric designationS610×149

Also known as

S610×149

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.