S6×17.25 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S6×17.25 is an AISC S shapes: American Standard beams shape. It is 6 in (152.4 mm) deep with a 3.57 in (90.7 mm) flange, a 0.465 in (11.8 mm) web and an average flange thickness of 0.359 in (9.1 mm), and weighs 17.3 lb/ft (25.7 kg/m). Area 5.05 in² (3,258 mm²); Ix = 26.2 in⁴ (1,090.5 cm⁴), Sx = 8.74 in³ (143.2 cm³), Zx = 10.5 in³ (172.1 cm³).

dDepth
152.4 mm6 in6 in152.4 mm
bfFlange width
90.7 mm3.57 in3.57 in90.7 mm
twWeb thickness
11.8 mm0.465 in0.465 in11.8 mm
tfFlange thickness
9.1 mm0.359 in0.359 in9.1 mm

Drawing

90.7 mm3.57 in152.4 mm6 intf 9.1 mmtf 0.359 intw 11.8 mmtw 0.465 ink 20.7 mmk 0.813 in
Drawn to scale · Dimensions in mmDimensions in inches

S6×17.25 specifications

dDepth6 in152.4 mm
bfFlange width3.57 in90.7 mm
twWeb thickness0.465 in11.8 mm
tfFlange thickness0.359 in9.1 mm
kDesign value0.813 in20.7 mm
kDetailing value13/16 in20.6 mm
WWeight17.3 lb/ft25.7 kg/m
AArea5.05 in²3,258 mm²
IxMoment of inertia, strong axis26.2 in⁴1,090.5 cm⁴
ZxPlastic modulus, strong axis10.5 in³172.1 cm³
SxSection modulus, strong axis8.74 in³143.2 cm³
rxRadius of gyration, strong axis2.28 in57.9 mm
IyMoment of inertia, weak axis2.29 in⁴95.3 cm⁴
ZyPlastic modulus, weak axis2.35 in³38.5 cm³
SySection modulus, weak axis1.28 in³21 cm³
ryRadius of gyration, weak axis0.67 in17.1 mm
JTorsional constant0.371 in⁴15.44 cm⁴
bf/2tfFlange slenderness4.97
h/twWeb slenderness9.7
Metric designationS150×25.7

Also known as

S150×25.7

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.