3/4″ Shackle, WLL 10,472 lb

Shackles

A 3/4″ anchor shackle (G-209 / G-2130 type) is rated 10,472 lb (4.75 t) working load limit. Pin diameter 0.88 in (22.4 mm), jaw opening at the pin 1.25 in (31.8 mm), inside length 2.81 in (71.4 mm), inside width of the bow 2.00 in (50.8 mm); minimum breaking load 62,832 lb (28.5 t).

Working load limit (WLL)
4.75 t10,472 lb10,472 lb4.75 t
BPin diameter
22.4 mm0.88 in0.88 in22.4 mm
AWidth at pin (jaw opening)
31.8 mm1.25 in1.25 in31.8 mm
CInside length
71.4 mm2.81 in2.81 in71.4 mm

Drawing

A 31.8 mmA 1.25 inC 71.4 mmC 2.81 inE 50.8 mmE 2.00 inB 22.4 mmB 0.88 inD 19.1 mmD 0.75 in
Anchor shackle to scale from the Crosby table: D body diameter, B pin, A jaw width at the pin, C inside length. Bow shape between the dimensioned points is schematic.Drawn to scale · Dimensions in mmDimensions in inches

3/4″ specifications

DBody diameter D (actual)19.1 mm0.75 in
Working load limit (WLL)4.75 t10,472 lb
BPin diameter22.4 mm0.88 in
AWidth at pin (jaw opening)31.8 mm1.25 in
CInside length71.4 mm2.81 in
EInside width of bow50.8 mm2.00 in
Minimum breaking load (6 × WLL)28.5 t62,832 lb

3/4 in (4.75 t, 7/8 in pin) is the common recovery shackle on 4×4 vehicles. Use it only with a rated recovery point.

Wire rope of the same diameter

All Shackles sizes

Compare all 17 sizes in the Shackles chart →

Sources

  1. The Crosby Group: G-209 / G-2130 anchor shackles, catalogue dimension and WLL table
  2. ASME B30.26: Rigging Hardware (shackle use and inspection)
  3. US Federal Specification RR-C-271: Chains and attachments, carbon and alloy steel (shackle Type IVA)
  4. EN 13889: Forged steel shackles for general lifting purposes, dee and bow shackles, grade 6
  5. Slings Unlimited / Elko Wire Rope: shackle capacity charts (WLL cross-check)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.