Shackle Size Chart (Anchor Shackle WLL & Dimensions)
Working load limit and main dimensions of US-style forged anchor shackles from 3/16 to 2-1/2 inch. The nominal size is the diameter of the bow, not the pin: a 1/2 in shackle has a 5/8 in pin, opens 13/16 in at the pin and is rated 2 t (4,400 lb).
Size chartTap a size for its drawing and full specs
| Size | Working load limit (WLL)tlb | BPin diametermmin | AWidth at pin (jaw opening)mmin | CInside lengthmmin | EInside width of bowmmin | DBody diameter D (actual)mmin | Minimum breaking load (6 × WLL)tlb |
|---|---|---|---|---|---|---|---|
| 3/16″ | 0.33728 | 6.40.25 | 9.70.38 | 22.40.88 | 15.20.60 | 4.80.19 | 24,365 |
| 1/4″ | 0.51,102 | 7.90.31 | 11.90.47 | 28.71.13 | 19.80.78 | 6.40.25 | 36,614 |
| 5/16″ | 0.751,653 | 9.70.38 | 13.50.53 | 30.71.21 | 21.30.84 | 7.90.31 | 4.59,921 |
| 3/8″ | 12,205 | 11.20.44 | 16.80.66 | 36.81.45 | 26.21.03 | 9.70.38 | 613,228 |
| 7/16″ | 1.53,307 | 12.70.50 | 19.10.75 | 42.91.69 | 29.51.16 | 11.20.44 | 919,842 |
| 1/2″ | 24,409 | 15.70.62 | 20.60.81 | 47.81.88 | 33.31.31 | 12.70.50 | 1226,455 |
| 5/8″ | 3.257,165 | 19.10.75 | 26.91.06 | 60.52.38 | 42.91.69 | 15.70.62 | 19.542,990 |
| 3/4″ | 4.7510,472 | 22.40.88 | 31.81.25 | 71.42.81 | 50.82.00 | 19.10.75 | 28.562,832 |
| 7/8″ | 6.514,330 | 25.41.00 | 36.61.44 | 84.13.31 | 57.92.28 | 22.40.88 | 3985,980 |
| 1″ | 8.518,739 | 28.41.12 | 42.91.69 | 95.53.76 | 68.32.69 | 25.41.00 | 51112,436 |
| 1-1/8″ | 9.520,944 | 31.81.25 | 461.81 | 1084.25 | 73.92.91 | 29.51.16 | 57125,663 |
| 1-1/4″ | 1226,455 | 35.11.38 | 51.62.03 | 1194.69 | 82.83.26 | 32.81.29 | 72158,733 |
| 1-3/8″ | 13.529,762 | 38.91.53 | 57.22.25 | 1335.24 | 91.93.62 | 36.11.42 | 81178,574 |
| 1-1/2″ | 1737,479 | 41.41.63 | 60.52.38 | 1465.75 | 98.63.88 | 38.91.53 | 102224,872 |
| 1-3/4″ | 2555,116 | 50.82.00 | 73.22.88 | 1787.01 | 1275.00 | 46.71.84 | 150330,693 |
| 2″ | 3577,162 | 57.22.25 | 82.63.25 | 1977.76 | 1465.75 | 52.82.08 | 210462,971 |
| 2-1/2″ | 55121,254 | 69.92.75 | 1054.13 | 26710.51 | 1847.24 | 69.12.72 | 330727,525 |
No exact match. The nearest sizes:
How to read a shackle
Every lifting shackle is forged with its working load limit (WLL) and usually the size and grade, for example WLL 4-3/4 t 3/4 on the bow. US anchor shackles of the Crosby G-209 type carry the WLL in metric tonnes (1 t = 2,205 lb), so "2 t" on a 1/2 in shackle means 4,409 lb. Grade 6 carbon shackles have a 6:1 design factor: the minimum breaking load is six times the WLL.
The size is the nominal diameter of the bow steel (the actual forging is a little larger on some sizes, see D). The pin is one size larger: 1/2 in shackle, 5/8 in pin; 3/4 in shackle, 7/8 in pin; 1 in shackle, 1-1/8 in pin. Check the jaw opening (A), the inside length (C) and the bow width (E) against the eye, hook or link that has to fit inside.
Screw pin shackles (G-209 type) are for temporary rigging and must be tightened fully before use. Bolt type shackles (G-2130 type, bolt, nut and cotter pin) are for long-term or permanent installations and where the pin could rotate under load. Body dimensions and WLL are the same.
About Shackles
The WLL applies to an in-line load on the centreline of the bow. Side loading reduces it: Crosby and ASME B30.26 give 100 % of WLL at 0°, 70 % at 45° and 50 % at 90° from in-line. Never load a shackle across the pin and the bow at the same time with two slings without accounting for the angle between them.
Anchor (bow) shackles have a rounded bow and take loads from several directions, which makes them the usual choice for connecting two or more sling legs. Chain (dee) shackles have a straight-sided D body with a narrower opening; they suit single in-line loads. The EN 13889 grade 6 dee and bow shackles in Europe use the same WLL ladder (0.5, 0.75, 1, 1.5, 2, 3.25, 4.75, 6.5, 8.5, 9.5, 12, 13.5, 17, 25 t …) with metric dimensions.
Remove a shackle from service when the bow or pin is worn by 10 % of the original diameter, bent, cracked, heat-damaged, or when the pin no longer seats fully. Replace a pin only with the maker's matching pin. A bolt from the bin is not a shackle pin.
Shackle WLL quick table
WLL in metric tonnes as stamped, with pounds (1 t = 2,204.6 lb). Values for grade 6 carbon anchor shackles; alloy shackles of the same size are rated higher.
| Size (in) | WLL (t) | WLL (lb) | Pin (in) |
|---|---|---|---|
| 1/4 | 0.5 | 1,102 | 5/16 |
| 3/8 | 1 | 2,205 | 7/16 |
| 1/2 | 2 | 4,409 | 5/8 |
| 5/8 | 3.25 | 7,165 | 3/4 |
| 3/4 | 4.75 | 10,472 | 7/8 |
| 7/8 | 6.5 | 14,330 | 1 |
| 1 | 8.5 | 18,739 | 1-1/8 |
| 1-1/4 | 12 | 26,455 | 1-3/8 |
| 1-1/2 | 17 | 37,479 | 1-5/8 |
| 2 | 35 | 77,162 | 2-1/4 |
Questions
What is the WLL of a 1/2 inch shackle?
2 metric tonnes (4,409 lb) for a grade 6 carbon anchor shackle of the Crosby G-209 type. The pin is 5/8 in and the minimum breaking load is 12 t (6 × WLL). Alloy shackles of the same size are rated higher; read the stamp.
What size pin does a 3/4 shackle use?
7/8 in (0.88 in). The pin is one size up from the bow: 3/8 shackle 7/16 pin, 1/2 shackle 5/8 pin, 5/8 shackle 3/4 pin, 1 in shackle 1-1/8 pin.
Is shackle WLL in short tons or metric tons?
Crosby and most US makers stamp anchor and chain shackles in metric tonnes (t). 4-3/4 t = 10,472 lb, not 9,500 lb. Some import shackles use short tons. The stamp and the certificate say which.
How much does side loading reduce shackle capacity?
To 70 % of WLL at 45° and 50 % at 90° from the shackle's centreline (Crosby, ASME B30.26). A 2 t shackle loaded at 90° is good for 1 t.
How do I measure a shackle?
Measure the diameter of the bow steel with a caliper: that is the size. Then the pin diameter (one size larger), the jaw width between the ears and the inside length from the pin to the bow. Compare with the chart; if the bow is worn more than 10 %, scrap it.
Sources
- The Crosby Group: G-209 / G-2130 anchor shackles, catalogue dimension and WLL table
- ASME B30.26: Rigging Hardware (shackle use and inspection)
- US Federal Specification RR-C-271: Chains and attachments, carbon and alloy steel (shackle Type IVA)
- EN 13889: Forged steel shackles for general lifting purposes, dee and bow shackles, grade 6
- Slings Unlimited / Elko Wire Rope: shackle capacity charts (WLL cross-check)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.