5/8″ Shackle, WLL 7,165 lb
Shackles
A 5/8″ anchor shackle (G-209 / G-2130 type) is rated 7,165 lb (3.25 t) working load limit. Pin diameter 0.75 in (19.1 mm), jaw opening at the pin 1.06 in (26.9 mm), inside length 2.38 in (60.5 mm), inside width of the bow 1.69 in (42.9 mm); minimum breaking load 42,990 lb (19.5 t).
- Working load limit (WLL)
- 3.25 t7,165 lb7,165 lb3.25 t
- BPin diameter
- 19.1 mm0.75 in0.75 in19.1 mm
- AWidth at pin (jaw opening)
- 26.9 mm1.06 in1.06 in26.9 mm
- CInside length
- 60.5 mm2.38 in2.38 in60.5 mm
Drawing
5/8″ specifications
| DBody diameter D (actual) | 15.7 mm0.62 in |
|---|---|
| Working load limit (WLL) | 3.25 t7,165 lb |
| BPin diameter | 19.1 mm0.75 in |
| AWidth at pin (jaw opening) | 26.9 mm1.06 in |
| CInside length | 60.5 mm2.38 in |
| EInside width of bow | 42.9 mm1.69 in |
| Minimum breaking load (6 × WLL) | 19.5 t42,990 lb |
Wire rope of the same diameter
All Shackles sizes
Sources
- The Crosby Group: G-209 / G-2130 anchor shackles, catalogue dimension and WLL table
- ASME B30.26: Rigging Hardware (shackle use and inspection)
- US Federal Specification RR-C-271: Chains and attachments, carbon and alloy steel (shackle Type IVA)
- EN 13889: Forged steel shackles for general lifting purposes, dee and bow shackles, grade 6
- Slings Unlimited / Elko Wire Rope: shackle capacity charts (WLL cross-check)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.