20 ft flat rack Container Dimensions
Shipping Containers · Flat rack
The 20 ft flat rack container is 6,058 mm (238.50 in) × 2438 mm (95.98 in) × 2591 mm (102.01 in) outside. Inside it measures about 5,612–5,940 mm (220.94–233.86 in) × 2225–2438 mm (87.60–95.98 in) × 2213–2255 mm (87.13–88.78 in). Values other than the outside dimensions are typical and vary slightly by builder.
- lInternal length (typical)
- 5,612–5,940 mm220.94–233.86 in220.94–233.86 in5,612–5,940 mm
- wInternal width (typical)
- 2225–2438 mm87.60–95.98 in87.60–95.98 in2225–2438 mm
- hInternal height (typical)
- 2213–2255 mm87.13–88.78 in87.13–88.78 in2213–2255 mm
Drawing
20 ft flat rack specifications
| LExternal length | 6,058 mm238.50 in |
|---|---|
| WExternal width | 2438 mm95.98 in |
| HExternal height | 2591 mm102.01 in |
| lInternal length (typical) | 5,612–5,940 mm220.94–233.86 in |
| wInternal width (typical) | 2225–2438 mm87.60–95.98 in |
| hInternal height (typical) | 2213–2255 mm87.13–88.78 in |
| Tare weight (typical) | 2,500–2,900 kg5,512–6,393 lb |
| Max. gross weight (typical rating) | 30,480–34,000 kg67,197–74,957 lb |
20 ft flat racks have a strong steel floor and end walls; many have collapsible ends so empty racks can be stacked. Concentrated loads must be spread over the floor beams; the permitted load per metre is on the rack's data plate.
Also known as
Other containers with the same outside length
All Shipping Containers sizes
Sources
- ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
- ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
- Hapag-Lloyd: Container specification (container fleet data)
- DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
- Rohlig: Container specifications (reefer, open top)
- Triton International / Searates: Flat rack specifications
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.