20 ft open top Container Dimensions

Shipping Containers · Open top

The 20 ft open top container is 6,058 mm (238.50 in) × 2438 mm (95.98 in) × 2591 mm (102.01 in) outside. Inside it measures about 5,898 mm (232.20 in) × 2352 mm (92.60 in) × 2348 mm (92.44 in). Values other than the outside dimensions are typical and vary slightly by builder.

lInternal length (typical)
5,898 mm232.20 in232.20 in5,898 mm
wInternal width (typical)
2352 mm92.60 in92.60 in2352 mm
hInternal height (typical)
2348 mm92.44 in92.44 in2348 mm
Capacity (typical)
32.5 m³1148 ft³1148 ft³32.5 m³

Drawing

6,058 mm238.50 in5,898 mm232.20 in2591 mm102.01 in
2340 mm92.13 in2280 mm89.76 in2438 mm95.98 in
Side view (dashed: internal space) and door end (door opening). Each view is to scale.Proportions shown, not to scale · Dimensions in mmDimensions in inches

20 ft open top specifications

LExternal length6,058 mm238.50 in
WExternal width2438 mm95.98 in
HExternal height2591 mm102.01 in
lInternal length (typical)5,898 mm232.20 in
wInternal width (typical)2352 mm92.60 in
hInternal height (typical)2348 mm92.44 in
Door opening width (typical)2340 mm92.13 in
Door opening height (typical)2280 mm89.76 in
Tare weight (typical)2,350 kg5,181 lb
Max. gross weight (typical rating)30,480 kg67,197 lb
Max. payload (typical)28,130 kg62,016 lb
Capacity (typical)32.5 m³1148 ft³
EUR pallets, 1 tier11
US 48 × 40 pallets, 1 tier9

Also known as

20OT22U1

Other containers with the same outside length

All Shipping Containers sizes

Compare all 11 sizes in the Shipping Containers chart →

Sources

  1. ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
  2. ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
  3. Hapag-Lloyd: Container specification (container fleet data)
  4. DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
  5. Rohlig: Container specifications (reefer, open top)
  6. Triton International / Searates: Flat rack specifications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.