40 ft flat rack Container Dimensions

Shipping Containers · Flat rack

The 40 ft flat rack container is 12,192 mm (480.00 in) × 2438 mm (95.98 in) × 2591 mm (102.01 in) outside. Inside it measures about 11,660–12,080 mm (459.06–475.59 in) × 2230–2420 mm (87.80–95.28 in) × 1955–2245 mm (76.97–88.39 in). Values other than the outside dimensions are typical and vary slightly by builder.

lInternal length (typical)
11,660–12,080 mm459.06–475.59 in459.06–475.59 in11,660–12,080 mm
wInternal width (typical)
2230–2420 mm87.80–95.28 in87.80–95.28 in2230–2420 mm
hInternal height (typical)
1955–2245 mm76.97–88.39 in76.97–88.39 in1955–2245 mm

Drawing

12,192 mm480.00 in2591 mm102.01 in
2438 mm95.98 in
Flat rack: floor and end walls, side view and end view. Each view is to scale.Proportions shown, not to scale · Dimensions in mmDimensions in inches

40 ft flat rack specifications

LExternal length12,192 mm480.00 in
WExternal width2438 mm95.98 in
HExternal height2591 mm102.01 in
lInternal length (typical)11,660–12,080 mm459.06–475.59 in
wInternal width (typical)2230–2420 mm87.80–95.28 in
hInternal height (typical)1955–2245 mm76.97–88.39 in
Tare weight (typical)5,000–5,800 kg11,023–12,787 lb
Max. gross weight (typical rating)45,000 kg99,208 lb

40 ft flat racks are rated up to about 45 t gross. Internal length between end walls and usable height differ a lot between fixed-end and collapsible designs.

Also known as

40FR

Other containers with the same outside length

All Shipping Containers sizes

Compare all 11 sizes in the Shipping Containers chart →

Sources

  1. ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
  2. ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
  3. Hapag-Lloyd: Container specification (container fleet data)
  4. DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
  5. Rohlig: Container specifications (reefer, open top)
  6. Triton International / Searates: Flat rack specifications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.