40 ft open top Container Dimensions

Shipping Containers · Open top

The 40 ft open top container is 12,192 mm (480.00 in) × 2438 mm (95.98 in) × 2591 mm (102.01 in) outside. Inside it measures about 12,032 mm (473.70 in) × 2352 mm (92.60 in) × 2348 mm (92.44 in). Values other than the outside dimensions are typical and vary slightly by builder.

lInternal length (typical)
12,032 mm473.70 in473.70 in12,032 mm
wInternal width (typical)
2352 mm92.60 in92.60 in2352 mm
hInternal height (typical)
2348 mm92.44 in92.44 in2348 mm
Capacity (typical)
66.4 m³2345 ft³2345 ft³66.4 m³

Drawing

12,192 mm480.00 in12,032 mm473.70 in2591 mm102.01 in
2340 mm92.13 in2280 mm89.76 in2438 mm95.98 in
Side view (dashed: internal space) and door end (door opening). Each view is to scale.Proportions shown, not to scale · Dimensions in mmDimensions in inches

40 ft open top specifications

LExternal length12,192 mm480.00 in
WExternal width2438 mm95.98 in
HExternal height2591 mm102.01 in
lInternal length (typical)12,032 mm473.70 in
wInternal width (typical)2352 mm92.60 in
hInternal height (typical)2348 mm92.44 in
Door opening width (typical)2340 mm92.13 in
Door opening height (typical)2280 mm89.76 in
Tare weight (typical)3,850 kg8,488 lb
Max. gross weight (typical rating)30,480 kg67,197 lb
Max. payload (typical)26,630 kg58,709 lb
Capacity (typical)66.4 m³2345 ft³
EUR pallets, 1 tier25
US 48 × 40 pallets, 1 tier20

Also known as

40OT42U1

Other containers with the same outside length

All Shipping Containers sizes

Compare all 11 sizes in the Shipping Containers chart →

Sources

  1. ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
  2. ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
  3. Hapag-Lloyd: Container specification (container fleet data)
  4. DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
  5. Rohlig: Container specifications (reefer, open top)
  6. Triton International / Searates: Flat rack specifications

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.