40 ft high cube reefer Container Dimensions
Shipping Containers · Refrigerated (reefer)
The 40 ft high cube reefer container is 12,192 mm (480.00 in) × 2438 mm (95.98 in) × 2896 mm (114.02 in) outside. Inside it measures about 11,583 mm (456.02 in) × 2294 mm (90.31 in) × 2500–2554 mm (98.43–100.55 in). Values other than the outside dimensions are typical and vary slightly by builder.
- lInternal length (typical)
- 11,583 mm456.02 in456.02 in11,583 mm
- wInternal width (typical)
- 2294 mm90.31 in90.31 in2294 mm
- hInternal height (typical)
- 2500–2554 mm98.43–100.55 in98.43–100.55 in2500–2554 mm
- Capacity (typical)
- 67 m³2366 ft³2366 ft³67 m³
Drawing
40 ft high cube reefer specifications
| LExternal length | 12,192 mm480.00 in |
|---|---|
| WExternal width | 2438 mm95.98 in |
| HExternal height | 2896 mm114.02 in |
| lInternal length (typical) | 11,583 mm456.02 in |
| wInternal width (typical) | 2294 mm90.31 in |
| hInternal height (typical) | 2500–2554 mm98.43–100.55 in |
| Tare weight (typical) | 3,900–4,800 kg8,598–10,582 lb |
| Max. gross weight (typical rating) | 30,480–34,000 kg67,197–74,957 lb |
| Capacity (typical) | 67 m³2366 ft³ |
| EUR pallets, 1 tier | 23 |
| US 48 × 40 pallets, 1 tier | 20 |
Almost all 40 ft reefers built today are high cubes. Inside height and tare vary with the refrigeration unit and builder, so they are given as ranges.
Also known as
40RH40HR45R1
Other containers with the same outside length
All Shipping Containers sizes
Sources
- ISO 668:2020, Series 1 freight containers, classification, dimensions and ratings
- ISO 1496-1: Series 1 freight containers, specification and testing, general cargo containers
- Hapag-Lloyd: Container specification (container fleet data)
- DSV: Shipping container dimensions (dry, reefer, open top, flat rack)
- Rohlig: Container specifications (reefer, open top)
- Triton International / Searates: Flat rack specifications
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.