TO-263 (D2PAK) Package Dimensions

SMD & IC Packages · Power SMD packages

See the drawing for the overall size over the leads and the pin pitch; the land pattern for your PCB comes from the part's datasheet.

LBody length
10.1 mm0.398 in0.398 in10.1 mm
ePitch
2.54 mm0.100 in0.100 in2.54 mm
Pins
3

Drawing

2.54 mm0.100 in10.1 mm0.398 in14.6–15.9 mm0.575–0.626 in
Top view. Body, pitch and lead span to scale; lead widths and terminations are typical proportions.Drawn to scale · Dimensions in mmDimensions in inches

TO-263 (D2PAK) specifications

LBody length10.1 mm0.398 in
EWidth over leads14.6–15.9 mm0.575–0.626 in
ePitch2.54 mm0.100 in
Pins3
StandardJEDEC TO-263

The surface-mount version of TO-220: the tab is soldered to the board. Leads at 2.54 mm pitch. Standard D2PAK is about 4.6 mm high; body width and length vary slightly between makers (body width about 9.8–10.5 mm), so use the maker's drawing for the footprint.

Also known as

D2PAKTO-263DDPAK

All packages

All 49 packages in the SMD & IC Packages chart →

Sources

  1. JEDEC JEP95: JEDEC Registered and Standard Outlines for Semiconductor Devices
  2. IEC 60115-8 / EIA-576: Fixed chip resistors, case sizes
  3. Yageo: RC series general purpose chip resistors datasheet
  4. Vishay: CRCW thick film chip resistors datasheet
  5. Texas Instruments: Package outline drawings (DBV, DCK, D, PW, DGK, RGT, PM)
  6. Nexperia: Package information (SOT23, SOT323, SOT363, SOD123, SOD323, SOT89, SOT223)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.