DIP-8 Package Dimensions

SMD & IC Packages · Through-hole packages

The DIP-8 package body is 9.02–10.16 mm (0.355–0.400 in) long and 6.35 mm (0.250 in) wide. See the drawing for the overall size over the leads and the pin pitch; the land pattern for your PCB comes from the part's datasheet.

LBody length
9.02–10.16 mm0.355–0.400 in0.355–0.400 in9.02–10.16 mm
WBody width
6.35 mm0.250 in0.250 in6.35 mm
ePitch
2.54 mm0.100 in0.100 in2.54 mm
Pins
8

Drawing

2.54 mm0.100 in9.02–10.16 mm0.355–0.400 in6.35 mm0.250 in7.62 mm0.300 in
Top view. Body, pitch and lead span to scale; lead widths and terminations are typical proportions.Drawn to scale · Dimensions in mmDimensions in inches

DIP-8 specifications

LBody length9.02–10.16 mm0.355–0.400 in
WBody width6.35 mm0.250 in
EWidth over leads7.62 mm0.300 in
HHeight (max.; chips: typ.)5.33 mm0.210 in
ePitch2.54 mm0.100 in
Pins8
StandardJEDEC MS-001BA

2.54 mm pitch, rows 7.62 mm apart. Pin 1 is marked by a dot or notch; pins count counter-clockwise viewed from the top.

Also known as

PDIP-8DIL-8

Other Through-hole packages with the same pitch

All packages

All 49 packages in the SMD & IC Packages chart →

Sources

  1. JEDEC JEP95: JEDEC Registered and Standard Outlines for Semiconductor Devices
  2. IEC 60115-8 / EIA-576: Fixed chip resistors, case sizes
  3. Yageo: RC series general purpose chip resistors datasheet
  4. Vishay: CRCW thick film chip resistors datasheet
  5. Texas Instruments: Package outline drawings (DBV, DCK, D, PW, DGK, RGT, PM)
  6. Nexperia: Package information (SOT23, SOT323, SOT363, SOD123, SOD323, SOT89, SOT223)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.