TO-220 Package Dimensions
SMD & IC Packages · Through-hole packages
The TO-220 package body is 10 mm (0.394 in) long and 4.3–4.7 mm (0.169–0.185 in) wide. See the drawing for the overall size over the leads and the pin pitch; the land pattern for your PCB comes from the part's datasheet.
- LBody length
- 10 mm0.394 in0.394 in10 mm
- WBody width
- 4.3–4.7 mm0.169–0.185 in0.169–0.185 in4.3–4.7 mm
- ePitch
- 2.54 mm0.100 in0.100 in2.54 mm
- Pins
- 3
Drawing
TO-220 specifications
| LBody length | 10 mm0.394 in |
|---|---|
| WBody width | 4.3–4.7 mm0.169–0.185 in |
| ePitch | 2.54 mm0.100 in |
| Pins | 3 |
| Standard | JEDEC TO-220AB |
The classic power package with a mounting tab and hole for a heatsink screw. The tab is usually connected to the middle pin; use an insulating pad if the heatsink is grounded.
Also known as
TO-220AB
Other Through-hole packages with the same pitch
All packages
Sources
- JEDEC JEP95: JEDEC Registered and Standard Outlines for Semiconductor Devices
- IEC 60115-8 / EIA-576: Fixed chip resistors, case sizes
- Yageo: RC series general purpose chip resistors datasheet
- Vishay: CRCW thick film chip resistors datasheet
- Texas Instruments: Package outline drawings (DBV, DCK, D, PW, DGK, RGT, PM)
- Nexperia: Package information (SOT23, SOT323, SOT363, SOD123, SOD323, SOT89, SOT223)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.