TO-92 Package Dimensions

SMD & IC Packages · Through-hole packages

The TO-92 package body is 4.45–5.2 mm (0.175–0.205 in) long and 3.18–4.19 mm (0.125–0.165 in) wide. See the drawing for the overall size over the leads and the pin pitch; the land pattern for your PCB comes from the part's datasheet.

LBody length
4.45–5.2 mm0.175–0.205 in0.175–0.205 in4.45–5.2 mm
WBody width
3.18–4.19 mm0.125–0.165 in0.125–0.165 in3.18–4.19 mm
ePitch
1.27 mm0.050 in0.050 in1.27 mm
Pins
3

Drawing

1.27 mm0.050 in4.45–5.2 mm0.175–0.205 in3.18–4.19 mm0.125–0.165 in
Top view. Body, pitch and lead span to scale; lead widths and terminations are typical proportions.Drawn to scale · Dimensions in mmDimensions in inches

TO-92 specifications

LBody length4.45–5.2 mm0.175–0.205 in
WBody width3.18–4.19 mm0.125–0.165 in
HHeight (max.; chips: typ.)4.32–5.33 mm0.170–0.210 in
ePitch1.27 mm0.050 in
Pins3
StandardJEDEC TO-92

Flat face towards you, leads down: pins 1–2–3 from left to right. Pin functions vary by part (EBC, CBE, GDS …).

All packages

All 49 packages in the SMD & IC Packages chart →

Sources

  1. JEDEC JEP95: JEDEC Registered and Standard Outlines for Semiconductor Devices
  2. IEC 60115-8 / EIA-576: Fixed chip resistors, case sizes
  3. Yageo: RC series general purpose chip resistors datasheet
  4. Vishay: CRCW thick film chip resistors datasheet
  5. Texas Instruments: Package outline drawings (DBV, DCK, D, PW, DGK, RGT, PM)
  6. Nexperia: Package information (SOT23, SOT323, SOT363, SOD123, SOD323, SOT89, SOT223)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.