08B Sprocket Dimensions (9–60 Teeth)

Sprockets · ISO 606 B series (European)

Sprockets for 08B chain (ISO 606 B series, European) are built on a 12.70 mm (1/2 in) chain pitch and a 8.51 mm (0.335 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
12.70 mm1/2 in1/2 in12.70 mm
DrRoller diameter
8.51 mm0.335 in0.335 in8.51 mm
WWidth between inner plates
7.75 mm0.305 in0.305 in7.75 mm

Drawing

p 12.70 mmp 1/2 inOD ⌀79.65 mmOD ⌀3.136 inBD ⌀64.63 mmBD ⌀2.544 inPD ⌀73.14 mmPD ⌀2.879 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

08B specifications

pChain pitch12.70 mm1/2 in
DrRoller diameter8.51 mm0.335 in
WWidth between inner plates7.75 mm0.305 in

08B is the European 1/2" pitch chain. It is not interchangeable with ANSI #40: the roller is 8.51 mm (vs 7.94 mm) and the inner width 7.75 mm (vs 7.94 mm). Pitch diameters are the same for the same tooth count.

Also known as

08B-1

Other chains with the same pitch

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.