#40 Sprocket Dimensions (9–60 Teeth)

Sprockets · ANSI (ASME B29.1) roller chain

Sprockets for #40 chain (ANSI, ASME B29.1 roller chain) are built on a 12.70 mm (1/2 in) chain pitch and a 7.94 mm (5/16 in) roller. The table below gives the pitch, outside, bottom and caliper diameters for every tooth count from 9 to 60, computed with the ASME B29.1 formulas.

pChain pitch
12.70 mm1/2 in1/2 in12.70 mm
DrRoller diameter
7.94 mm5/16 in5/16 in7.94 mm
WWidth between inner plates
7.94 mm5/16 in5/16 in7.94 mm

Drawing

p 12.70 mmp 1/2 inOD ⌀79.65 mmOD ⌀3.136 inBD ⌀65.20 mmBD ⌀2.567 inPD ⌀73.14 mmPD ⌀2.879 in
18-tooth sprocket with three rollers seated. Diameters to scale; tooth flank simplified.Drawn to scale · Dimensions in mmDimensions in inches

#40 specifications

pChain pitch12.70 mm1/2 in
DrRoller diameter7.94 mm5/16 in
WWidth between inner plates7.94 mm5/16 in
tTooth width, single strand7.23 mm0.285 in
ISO 606 A-series equivalent08A

The most common chain size in the US: 1/2" pitch, 5/16" roller, 5/16" between inner plates. ISO 606 calls it 08A. A 17-tooth #40 sprocket has PD = 2.721", OD ≈ 2.975".

Also known as

08ARS40

Other chains with the same pitch

Chain dimensions

All sprocket chain sizes

Compare all 19 chain sizes in the Sprockets chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments, and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Martin Sprocket & Gear: Sprocket engineering data (formulas, tooth form)
  4. Engineers Edge: Roller chain sprocket diameters per ANSI/ASME B29.1M
  5. Ametric: American Standard (ANSI) roller chain dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.